World Ag Expo Exhibitor List

The published figure for the 2026 edition is around 1,200 exhibiting companies. The show's stated scope — agricultural machinery, equipment, services and technology — is wide enough that this field is not one type of business. It runs from manufacturers showing tractors, implements, harvesters, sprayers, irrigation hardware and livestock equipment, through regional dealerships and distributors who sell and service that iron, to service and technology firms whose product is a contract, a subscription or a piece of farm software rather than a machine. For anyone building a shortlist, the useful distinction is function, not size: an exhibitor that manufactures, one that sells and services locally, and one that supplies a service the farm would otherwise arrange by phone are three different conversations, and they are usually three different stands. The organiser does not publish a geographic breakdown of the exhibitor field, so where companies are based cannot be read off the public roster. What can be read is the category each company exhibits under, which is the level at which a three-day visit is realistically planned. Treat the 1,200 figure as a working number: rosters shift as companies confirm, expand or withdraw in the weeks before the gates open on February 10.

• Around 1,200 exhibiting companies in the 2026 field
• Show scope spans machinery, equipment, services and technology
• Manufacturers, regional dealers and service providers exhibit side by side
• No published country or state split for exhibitors
• Roster changes as companies confirm or withdraw before February

The organiser frames the show as agriculture, with machinery, equipment, services and technology as its categories. In practice the exhibitor roster resolves into the farm sectors those categories serve, and the surrounding Tulare County economy gives a good indication of which ones dominate. This is dairy and specialty-crop country, and the equipment and service names on the floor reflect operations of that kind: machinery sized for large-acreage work, irrigation and water-management hardware for a region where water is the binding constraint, spray and application equipment, harvest equipment, and the software and sensor exhibitors that now sit alongside the iron. Livestock and dairy-related equipment and services form another visible cluster, consistent with the county's farm profile. What the public roster does not do is quantify any of this. There is no published sector-by-sector exhibitor count, so a buyer cannot say from the data alone that there are, for example, more irrigation exhibitors than harvest exhibitors in 2026. Sector labels are the practical unit: they tell a buyer which part of the field to walk, not how large it is. Anyone who needs the count should look at the organiser's own exhibitor directory closer to the show, when the roster has settled.

• Tractors, implements and harvest equipment
• Irrigation and water-management hardware
• Livestock and dairy-related equipment and services
• Farm software, sensors and precision-agriculture technology
• Agronomy, testing and farm service businesses
• Sector-level exhibitor counts are not published

An exhibitor list for World Ag Expo 2026 is a roster of companies, not a catalogue of everything each will bring to Tulare. What it gives a buyer is the where: the set of companies making the trip, grouped by the category they exhibit under, so that three days can be planned around a handful of areas rather than the whole International Agri-Center site. Where the organiser publishes booth or location detail, that can be paired with the exhibitor entries to sequence a route; where it does not, category is the usable level of granularity. Buyers should expect the data to answer questions such as which names in the machinery categories are new to the 2026 roster, which service providers are exhibiting that a farm would otherwise only encounter by phone, and which exhibitors sit in the same category as suppliers the buyer already deals with. It will not answer what a specific machine costs, whether a particular model will be on the stand, or who deserves an hour of a buyer's time. Those are show-floor questions, settled by conversation, and no roster settles them in advance.

• Company names grouped by exhibit category
• Useful for sequencing a route, not for pricing
• New-to-2026 names can be spotted against earlier rosters
• Booth-level detail only where the organiser publishes it
• No substitute for talking to the exhibitor

World Ag Expo 2026 occupies February 10, 11 and 12 — a Tuesday through Thursday — which places it in the stretch of the calendar when growers and dealers commit capital ahead of the coming season. The organiser has also opened applications for the 2026 Top 10 New Products programme and the seminar series, the two parts of the show that pull attention beyond the equipment stands. That combination of timing and programming is what makes a February week in Tulare worth a booth for an exhibitor and worth a flight for a buyer. For buyers, the practical consequence is scale. Around 100,000 attendees and roughly 1,200 exhibitors across three days means the marginal value of a plan is high, and the cost of turning up without one is a day lost to walking. The exhibitor list is the cheapest element of that plan and the one most often skipped. Where the show differs from a single-category farm show is that a buyer cannot assume the relevant exhibitors are all in one area: machinery, services and technology are intermixed across the site, so a shortlist built by category is more useful than a route built by habit.

• February 10–12, 2026, Tuesday through Thursday
• Top 10 New Products applications open for 2026
• Seminar series runs alongside the equipment exhibits
• Around 100,000 attendees expected across the three days
• Pre-season timing for equipment and input decisions

The venue is the International Agri-Center at 4500 S. Laspina St., Tulare, CA 93274 — a permanent site with buildings and outdoor exhibit areas, which is why an exhibitor list can be read in relation to physical space at all. Tulare sits in the southern Central Valley, and the county's farm economy is dominated by dairy and high-value specialty crops. That shapes what is on show in February: large-scale field machinery, water and irrigation technology for a region where allocation is the recurring constraint, and service businesses built around the crops and herds actually grown within a few hours' drive. Buyers from outside the region should not read the exhibitor field as a strictly Californian one. Machinery brands and service firms that exhibit in Tulare sell well beyond the valley, and the show's scale draws an industry-wide exhibitor base rather than a purely local one. The organiser does not publish a state-by-state or country-by-country split, so this is a reasonable expectation rather than a documented figure. Use the categories that match your operation, not the distance to Tulare, as the test for relevance.

• International Agri-Center, 4500 S. Laspina St., Tulare, CA 93274
• Permanent site with indoor and outdoor exhibit space
• Southern Central Valley location in dairy and specialty-crop country
• Exhibiting brands serve markets well beyond California
• No published country or state split for exhibitors

A dealer principal arriving on February 10 usually has one question: which manufacturers on the exhibitor list are recruiting or reviewing representation, and which of their existing lines will have people on site. An irrigation manager has a different one: which exhibitors in the water and application categories are bringing equipment rather than brochures, and which sit close enough together to be walked in a single afternoon. A dairy or livestock operation reads the same data for equipment and service names that would otherwise mean a series of phone calls; a technology buyer uses it to separate software exhibitors from hardware companies that mention software. The shared pattern is that the exhibitor list is consumed before the show and discharged after it. Before: shortlist by category, mark the names that are new in 2026, decide in advance which categories to skip entirely. On site: use the shortlist as a checklist against the clock, not as a plan to complete. After: rank follow-ups by what was actually said at the stand, and note which categories looked thin, because that is the material for next year's plan.

• Dealers mapping which manufacturers will be on site
• Growers narrowing irrigation and application exhibitors
• Dairy and livestock operations scanning equipment and service names
• Technology buyers separating software from hardware exhibitors
• Post-show follow-up built on a pre-written shortlist

The exhibitor list for World Ag Expo 2026 covers the exhibiting companies on the organiser's published roster — the roughly 1,200 names — together with the categories they exhibit under. It is a snapshot of a roster that moves: companies are added, expand their space or withdraw in the weeks before February 10, so a list read in December is not identical to the one that applies on the opening morning. Product-level detail is not part of it. What any one exhibitor brings to Tulare, prices, availability, whether a demonstration is planned, is held by that company and confirmed, if at all, on the stand. The 100,000 attendee figure describes attendance at the event; it is not a list of attendees, and no attendee-level data sits behind this page. Buyers should also treat the exhibitor count as the organiser's published figure rather than a precise, frozen number — shows of this size report round figures, and the honest reading is around 1,200. For final booth assignments, gate times and ticketing, the organiser's own site is the authority, not the exhibitor roster.

• Built from the organiser's published exhibitor roster
• Around 1,200 companies for the 2026 edition
• Updates as companies join or withdraw before February 10
• Covers exhibiting companies, not the 100,000 attendees
• Product-level detail stays with the exhibitor

The organiser has announced that applications are open for the 2026 Top 10 New Products programme and the seminar series, which means the show's non-exhibit programming is being assembled well before the February 10 opening. Both matter to a buyer working from an exhibitor list, for different reasons. The New Products programme is the one part of World Ag Expo where machinery, equipment and technology are singled out rather than left for a buyer to discover aisle by aisle, and its results are most useful when read back against the exhibitor roster — the companies behind the entries are exhibiting companies, and matching the two tells a buyer which stands to prioritise. The seminar series adds a second reason to be on site on a given day, and anyone planning a route should check the programme before fixing the order of visits. Neither the product list nor the seminar schedule is part of the exhibitor data, and neither should be assumed: the 2026 line-ups are being built, and the organiser's site is where they will appear. Treat programming as a layer on top of the exhibitor field, not a replacement for it.

• Organiser has opened 2026 Top 10 New Products applications
• Seminar series programme is being built for February 10–12
• New Products announcements are best read with the exhibitor roster
• Programming is additional to, and separate from, the exhibit field
• 2026 line-ups are not yet final and are published by the organiser

The dates are fixed: Tuesday February 10 to Thursday February 12, 2026. The venue is the International Agri-Center, 4500 S. Laspina St., Tulare, CA 93274, and the organiser is the International Agri-Center itself, which runs both the site and the show. The event website, worldagexpo.com, is where attendee and exhibitor information is published, including the details an exhibitor list does not carry: gate times, ticketing, transport and accessibility arrangements, and any changes to the programme or site layout. Buyers planning around the exhibitor data should build the trip in this order — first the categories that matter to the operation, then the companies within them, then the days and hours needed to reach those companies on site. Three days is enough to work a well-built shortlist across a 1,200-company field and not enough to work a vague one. Because the roster can change up to the show, check the organiser's directory in the final week before travelling, and keep the exhibitor list as the working document rather than the itinerary. Anything published about the 2026 edition only on worldagexpo.com should be treated as more current than any second-hand summary.

• February 10–12, 2026, Tuesday to Thursday
• International Agri-Center, Tulare, California
• Organiser: International Agri-Center
• Event website: worldagexpo.com
• Gate times, tickets and transport come from the organiser, not the exhibitor data

The exhibitor data earns its keep at three points, and it is used differently at each. Before the show, the task is elimination rather than selection: with around 1,200 companies and three days, the value of the list is in deciding which categories to skip, then marking the remaining exhibitors that are new to the 2026 roster and therefore unfamiliar. That produces a shortlist small enough to walk properly. During the show, the list becomes a checklist against the clock — a buyer who has marked twelve stands and visited nine by the second afternoon is ahead, not behind. The temptation to add stands on impulse is exactly what the shortlist exists to resist. After the show, the list reframes as a record: which exhibitors were visited, which were missed, what was said, and which categories turned out to be thinner or deeper in person than they looked on paper. Comparing the 2026 roster with earlier editions is a further use, since names that return year after year and names that appear once tell a buyer something about how a supplier treats the show. What exhibitor data cannot do is sell on an exhibitor's behalf; it only gets a buyer to the right stand with the right question.

• Before: shortlist by category and flag what is new in 2026
• On site: use the roster as a checklist against the hours available
• After: rank follow-ups by what was actually discussed
• Compare editions to see which exhibitor names return
• Exhibitor data supports the plan; it does not replace the visit