FABTECH Exhibitor List

The FABTECH 2026 exhibitor list is a direct product of the five organisations that own the show. SME recruits manufacturing technology suppliers, the Fabricators & Manufacturers Association International brings fabricating equipment, the American Welding Society covers welding and cutting, the Precision Metalforming Association covers stamping, coil handling and forming, and the Chemical Coaters Association International fills out finishing and coating. Because each association draws on a separate membership base, the Las Vegas Convention Center floor for 21 to 23 October 2026 holds companies that would otherwise be scattered across four or five specialist events. Press brakes and fibre lasers sit near welding power sources; stamping presses sit near powder coating lines; robotic cells sit near additive platforms. For anyone building a shortlist, that mix is the point. A job shop evaluating a new bending cell walks the same aisles as a coating line manager comparing pretreatment chemistry. The trade-off is breadth of choice, so filtering the FABTECH 2026 exhibitor directory by product category is usually faster than reading it end to end.

• SME recruits manufacturing technology and additive exhibitors
• FMA brings fabricating, cutting and bending equipment suppliers
• AWS anchors welding, cutting and consumable companies
• PMA covers stamping, coil handling and metalforming
• CCAI fills the finishing and coating segment of the floor

Before booking travel to Nevada, the useful artefact is the exhibitor record itself. SME publishes the official FABTECH 2026 exhibitor directory through its client platform, the FABTECH2026 listing at s36.a2zinc.net, and a companion FABTECH 2026 exhibitor listing is hosted on the SmallWorld Labs event platform. Between them, entries generally identify the exhibiting company, the product categories it associates itself with, and a stand reference for locating it inside the Las Vegas Convention Center. What the available material does not state is how many exhibitors will participate. Neither the official FABTECH 2026 pages reviewed nor the companion listing published a final exhibitor count, and attendee totals are likewise absent. That gap matters when you are choosing between a single-day badge and the full three-day run from 21 to 23 October 2026. Treat any exhibitor figure you encounter elsewhere as provisional until SME publishes its own, and judge the floor by the category filters in the directory rather than by headline totals.

• Official directory sits on SME's FABTECH2026 client platform
• Companion listing at fabtech2026.smallworldlabs.com/exhibitors
• Entries usually carry company, category and stand information
• No exhibitor or attendee totals appear in the reviewed sources
• Use category filters, not headline numbers, to size the floor

FABTECH does not sit still. The organisers announced new event dates and locations covering both the 2024 and 2026 editions, and that announcement is what fixes FABTECH 2026 at the Las Vegas Convention Center for 21 to 23 October 2026. The practical consequence for exhibitors and visiting buyers is that 2026 is not a rerun of a Chicago or Orlando floor plan. Freight routes, hotel blocks and even the regional mix of visitors shift when the host city changes. Las Vegas sits within driving or short-flight range of fabricators across California, Arizona, Utah and Nevada itself, while Midwest and Eastern shops face a longer trip and tend to plan floor time more tightly. For exhibitors deciding what to ship, a Las Vegas stop favours machinery aimed at job shops and structural fabricators serving western construction, aerospace and mining supply chains. The FABTECH archive on the show's own site remains the reference for which city hosted which year.

• 2026 edition runs 21 to 23 October at the Las Vegas Convention Center
• Dates and locations were announced together for the 2024 and 2026 cycles
• The host city rotates instead of staying fixed
• Western fabricators can reach Las Vegas by road or short flight
• Venue choice changes freight, hotel and travel planning for exhibitors

FABTECH 2026 exhibitor data is written for people arriving with a technical question rather than general curiosity. The heaviest users tend to be job shop owners and general managers weighing whether a new press brake, laser or welding cell justifies capital; manufacturing and process engineers comparing consumables, filler metals or coating chemistries; plant and maintenance managers scouting automation retrofits; and purchasing staff who need to know which suppliers will actually be in Las Vegas. Coating line supervisors filter the directory for CCAI-linked exhibitors, welding engineers look for AWS-linked names, and forming specialists work the PMA categories. Distributors and equipment resellers use the same listings to spot lines they could carry. Educators and students arriving through SME-linked programmes use the directory to target a manageable number of companies across the three show days. The common thread is narrowing: with a five-association exhibitor base behind FABTECH 2026, the value of the list lies in cutting it down before 21 October arrives.

• Job shop owners assessing capital equipment purchases
• Process and manufacturing engineers comparing consumables and chemistries
• Purchasing teams confirming which suppliers will attend
• Coating and welding specialists filtering by association category
• Educators and students targeting a short list of stands

Nevada and its neighbours hold a fragmented but dense fabrication base: structural steel and plate shops, sheet metal contractors, precision forming and machining job shops, and suppliers feeding aerospace, defence, mining and construction equipment programmes. That is the audience a Las Vegas edition of FABTECH can reasonably be expected to pull toward the convention centre, and it is why western exhibitors in the directory deserve a closer look. No verified attendance figure for FABTECH 2026 appeared in the material reviewed, so it is not possible to state how many buyers will walk the floor or how the western share compares with a Chicago or Orlando year. What can be said is structural. The venue gives western fabricators a show they can reach without a cross-country flight, and the 21 to 23 October timing lands in a month when many shops are already shaping next year's capital plans. Exhibitors demonstrating machinery for small and mid-sized shops usually find that regional dynamic worth weighting.

• Nevada, Arizona, Utah and California form the natural draw area
• Structural steel, sheet metal and job shops dominate the regional base
• Aerospace, defence, mining and construction supply chains feed demand
• No attendance total was published for the 2026 edition
• October timing overlaps with capital planning cycles

FABTECH 2026 exhibitor data covers companies, not visitors. Its scope follows the categories the show is built around: metal forming and fabricating equipment, welding and cutting systems and consumables, finishing and coating technology, additive manufacturing platforms, automation and robotics, tooling, safety equipment and shop software. Each record in the official SME directory and the companion FABTECH 2026 listing ties a company to one or more of those categories, which is what makes filtering possible before travelling to the Las Vegas Convention Center. The limits are worth stating plainly. Attendee information is not part of an exhibitor listing. Neither the official FABTECH 2026 pages nor the companion directory published exhibitor or attendee totals at the time of review. Company profiles and stand references can also shift as October 2026 approaches, so a route planned today should be re-checked nearer the show. Coverage is broad across processes but not uniform in depth: some categories will be densely represented, others thinly, and only the live directory reveals which.

• Scope follows the show's core process categories
• Each record maps a company to one or more categories
• Attendee information falls outside exhibitor data
• Exhibitor and attendee totals were not published
• Booth references and profiles can change before October 2026

Three days, Wednesday 21 to Friday 23 October 2026, is enough to cover a targeted slice of the Las Vegas Convention Center floor, but not all of it. The FABTECH 2026 exhibitor directory is what makes the difference. Note the exhibitors that matter across the categories you actually need, whether that is bending, welding, coating or automation, and group them by stand location so your route does not zig-zag between halls. Book meetings in advance, because exhibitors staffing a five-association show juggle several buyer conversations an hour, particularly on the opening day. Keep the final afternoon for companies you discover on the floor rather than the ones you pre-selected, since cross-category finds are a feature of FABTECH rather than an accident. On the practical side, plan travel time between hotels and halls, and confirm what your badge covers before committing to a schedule. Details such as hall assignments and daily show hours are best verified against the official FABTECH 2026 site as the date nears.

• Show days run Wednesday 21 to Friday 23 October 2026
• Group shortlisted exhibitors by stand location before travelling
• Schedule meetings early in the run when exhibitor diaries fill
• Reserve the last afternoon for on-floor discoveries
• Confirm hall assignments and show hours closer to the event

Welding is one reason FABTECH exists in its current form, and AWS co-ownership keeps joining, cutting and consumables at the centre of the 2026 Las Vegas edition rather than at its margins. For exhibitor-data users, that means the welding slice of the directory is deeper than a general manufacturing show's would be: power source and wire feeder builders, filler metal and consumable suppliers, cutting and bevelling equipment, fume extraction and welding safety, plus training and certification-linked organisations arriving through AWS channels. Buyers who come to the Las Vegas Convention Center between 21 and 23 October 2026 with a welding problem in hand, whether it is throughput on a robotic cell, rework on a difficult material, or a procedure that has to travel between plants, can build an entire aisle plan from that category alone. It is also where AWS member companies look for partners and distributors. The reviewed sources do not break out how many welding exhibitors will attend, so the directory itself is the reliable way to gauge depth.

• AWS co-ownership keeps joining and cutting central to the show
• Power sources, feeders and filler metals form a deep category
• Cutting, bevelling and fume extraction exhibitors sit alongside welders
• Training and certification organisations arrive through AWS channels
• No published breakdown of welding exhibitor numbers exists

Automation, robotics and additive manufacturing sit inside the stated FABTECH 2026 industry scope rather than in a separate hall of their own. That placement produces the most interesting overlaps on the Las Vegas floor: a press brake paired with an automated tool changer, a welding cell with a robot tending it, a robotic handler feeding a laser, a metal additive platform standing near conventional machining. Because SME and PMA both help produce the show, exhibitors in these categories are not walled off from the forming and welding companies they increasingly integrate with. For a buyer, that changes how the directory should be read. Filtering on automation alone gives you integrators and cell builders; filtering on forming or welding first, then checking which of those companies list automation in their categories, gives a more realistic picture of what a production line conversation would look like. The reviewed sources give no exhibitor counts by category, so the live FABTECH 2026 listing is the only honest measure of how heavily each technology is represented.

• Automation and robotics sit within the show's core scope
• Additive platforms appear alongside conventional machining
• Integration overlaps show up between forming, welding and robotics
• Directory category filters reveal who actually offers automation
• No per-category exhibitor counts were published

Finishing is the category that surprises people who assume FABTECH is purely a cutting and welding show. The Chemical Coaters Association International is one of the five owners, and its involvement means exhibitors covering pretreatment, powder and liquid coating application, curing ovens and finishing line controls appear in the same FABTECH 2026 directory as press brakes and welding cells. That combination is unusual. Most events force a fabricator to choose between a metalworking floor and a finishing floor, and a shop that forms, welds and then coats its own parts usually ends up attending two shows instead of one. Use the exhibitor data to trace the sequence deliberately: forming and cutting suppliers first, then welding and joining, then coating and curing, so that a single trip to the Las Vegas Convention Center covers one continuous production conversation. Because each record ties a company to its categories, a finishing line manager can filter past machine tool builders and land directly on the coating names that matter.

• CCAI co-ownership puts finishing inside the same directory
• Pretreatment, powder, liquid coating and curing are covered
• Forming, welding and coating can be traced as one sequence
• Removes the need to attend separate metalworking and finishing shows
• Category filters separate coating exhibitors from machine builders

SME's official FABTECH 2026 exhibitor directory and the companion FABTECH 2026 exhibitor listing serve slightly different reading habits. The SME-hosted directory follows the format used across the organiser's event portfolio, with company entries tied to product categories and stand references for the Las Vegas Convention Center. The companion listing on the SmallWorld Labs platform presents the same exhibitor community in a different layout, which some users find quicker for scanning names. Neither source published exhibitor or attendee totals in the material reviewed, so they should be treated as complementary indexes rather than competing sources of headline numbers. The sensible workflow is to start with whichever interface lets you filter by product category, cross-check the company names that matter for scheduling across the 21 to 23 October 2026 run, and then confirm stand references nearer the show date, when assignments have settled and any late additions have appeared.

• SME directory follows the organiser's standard listing format
• SmallWorld Labs listing offers an alternative scan-friendly layout
• Neither source published exhibitor or attendee totals
• Cross-check names across both listings when building a schedule
• Re-confirm stand references closer to October 2026